SCE-800H STUMPCUTTER - EXCAVATOR MOUNTED
The SCE-800H is the largest stump cutter in this series. The SCE-800H is equipped with a cutting wheel with a diameter of 80cm (89 cm with teeth).
This Herder-Fermex is equipped standardly with a mechanically adjustable hydraulic motor. That makes this stump cutter suitable for every hydraulic excavators with an oil flow between 80 and 160 l/min (max. 420 bar) and it can be used on most excavators between 10 and 20 tons.
The largest stump cutter in this series
Suitable for all hydraulic excavators with oil flow between 80 and 160 l./min
Suitable for excavators between 10 and 30 tons
Cutting wheel with a diameter of 80 cm (89 cm with teeth)
Comes standard with mechanically adjustable hydraulic motor
Maximum freedom of movement thanks to hydraulic drive
SCE-800H STUMPCUTTER VIDEOS
0:16
0:16
SCE-800H SPECIFICATIONS
| Required volume flow: | Between 80 and 160 l./min |
| Max operating pressure: | 420 bar |
| Number of required double action functions: | 1 |
| Safety: | Overpressure relief valve |
| Diameter cutting wheel: | 800 mm |
| Number of teeth: | 48 |
